Breaking 2004 Yamaha R1 5VY |
Post Reply |
Author | |
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
Posted: 03 February 2018 at 12:02 |
Breaking my 2004 Yamaha R1 track bike.
Frame with Carbon covers £230-provisionally sold Stainless race caliper bolts £12-provisionally sold ECU+Top Yoke+ignition £140-provisionally sold Sprint Steering Damper £160 Gear Indicator £70 Brembo 19 RCS(Scuffed from a off on previous bike) £150 Brembo Reservoir kit £25 QA throttle £80 Harris rearsets £120 Translogic is4 quick shifter £275 R&G Engine case protectors £100 Tank Bracket £20-provisionally sold Sub frame £85 Sub frame £85 SES Clock Bracket £60 SES Clock Bracket £60 Swingarm with Carbon protectors £70 Akrapovic full system with Carbon stubby end cans £550 k&N Air filter £40 Throttle Bodies £60 Fuel tank £100 Carbon airbox cover £50 Carbon tank infills £45 Ohlins rear shock with hydraulic preload adjuster £550 Front forks with K tech internalls £350 Clocks £100 Clocks, crack on screen but still work £75 Fuel Cap £15 Complete engine with Sigma Slipper clutch £1000 Red Airbox cover £25 Fairing set on bike £130 Wheels with discs, sprocketcarrier & Tyres £330 Wheels with discs and sprocket carrier that have been dipped £285 Radiator £55 radiator £55 Screens x 2 £15 R&G crash bungs £40 Carbon effect race air scoops £40 Message me about anything above or anything else i may have missed. http://i268.photobucket.com/albums/jj34/lucaszs07/23843497_10155362179593650_5087169277537649481_n_zps2agobvva.jpg" /> http://www.trackdayriders.co.uk/tdr/forum/breaking-2004-yamaha-r1-5vy_topic70721.html Edited by LucasR6 - 03 February 2018 at 13:53 |
|
J@Y
Instructor Joined: 08 March 2013 Location: North West Status: Offline Points: 1156 |
Post Options
Thanks(0)
|
Are they full cartridges or ssk20 revalve kit in the forks?
|
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
Hi jay was told they were k tec valve kit on forks mate when I bought bike .
|
|
tigger
Starter Joined: 07 June 2015 Location: Norwich Status: Offline Points: 2 |
Post Options
Thanks(0)
|
Hi Any chance of picks of the engine protection.
Are the front callipers still available Cheers |
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
Hi mate engine protectors have gone but calipers ware still available
|
|
J@Y
Instructor Joined: 08 March 2013 Location: North West Status: Offline Points: 1156 |
Post Options
Thanks(0)
|
Same as mine then
Thanks anyway. Any pics of the screens? And is it 15 for both or each? |
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
Hi mate be each ones a powerbronze I think mate
|
|
Scott221
Instructor Joined: 23 April 2012 Location: Worcester Status: Offline Points: 1013 |
Post Options
Thanks(0)
|
Hi mate. Have you got clip ons?
|
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
they are sold mate.
heres what I have left Spring steering damper £150 2016 R1 caliper £115 QA Throttle ££70 sub frame £85 sub frame £85 ses clock bracket £60 Swingarm with carbon £45 k&n filter £40 throttle bodies £50 carbon airbox £45 front forks with k tec £290 clocks £100 clocks cracked £70 red airbox cover £20 fairing set £125 dipped wheels £270 radiator £55 Screens £15 each coils £30 Clutch lever and perch £20 clutch perch £10 Race ram air scoops £35 Swingarm £25 Rear spindle £15 Rectifier £25 Loom with tilt sensors etc £30 |
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
bump
|
|
CarlHooper
fast Group Joined: 18 May 2015 Location: Chesterfield Status: Offline Points: 321 |
Post Options
Thanks(0)
|
is the Brembo RCS still available mate?
|
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
Sold mate. List above is what's left thanks
|
|
tomasbe
Starter Joined: 01 January 2018 Location: London Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Hi. I’m looking for fairing set. Any pics, available?
|
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
All I have left is a top and belly pan no seat unit
|
|
tomasbe
Starter Joined: 01 January 2018 Location: London Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Ok. That's fine. Any pics?
|
|
tomasbe
Starter Joined: 01 January 2018 Location: London Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Right. I missed photobucket thing. Are the fairings still available?
|
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
Hi mate I'll try get round to in laws and get some pics for you
|
|
tomasbe
Starter Joined: 01 January 2018 Location: London Status: Offline Points: 7 |
Post Options
Thanks(0)
|
It’s ok, mate. I saw pic on photobucket. Are there any cracks or fixings missing?
|
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
they were another set I sold mate on photobucket . these ate up in roof of grage at in laws
|
|
tomasbe
Starter Joined: 01 January 2018 Location: London Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Ok. Let me know when have it.
|
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
K tec forks £200 and damper now £110
|
|
tomasbe
Starter Joined: 01 January 2018 Location: London Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Fairing looks ok. I don’t care if there are scuffs and scratches. My question is are all fixing points intact or would I need to repair anything? And you have belly pan as well?
|
|
LucasR6
Instructor Joined: 13 February 2013 Location: Barnsley,South Status: Offline Points: 1310 |
Post Options
Thanks(0)
|
all fixings are good mate would just need some dzus fasteners that's all
|
|
tomasbe
Starter Joined: 01 January 2018 Location: London Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Sent you PM.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |