2012 CBR1000RR breaking

OK, I will be breaking my CBR1000RR over the next few weeks and there are a lot of nice parts available.

It's the bike in this build thread:

http://www.trackdayriders.co.uk/tdr/forum/black-white-bikes-cbr1000rr_topic34227_page3.html

Ohlins R&T forks - just been serviced - SOLD
Venhill braided lines front and back - front in 'h' format (nice!)
Unbranded clip on's - raised 25mm and fully adjustable, rather good actually.
Renthal grips
Race Products fairing incl. race airducts SOLD
Zero Gravity screen SOLD
SES Rearsets - These have been reserved
HRC brake reservoir tube
Leo Vince Full system
Motoholders race subframe, cutdown stock battery tray SOLD
Samco Hoses and stainless steel clamps
Servo Buddy
R&G:
Aero Crash Bungs
Engine protectors
Frame Bungs
Exhaust protector
Swingarm Bobbins
Front Spindle protectors

As well as all the standard bits too.

There is no road going parts available - fairings, lights, road forks have all been sold - sorry.

Frame with V5
Engine
Wheels
FRONT DISCS SOLD
Tanks
Yokes

And all that stuff up for graps.

Very little use, the bike has less than 2000 miles on it and is mint so I'll not be giving the bits away but I will try to be fair to TDR members.

VAT receipt will come with all parts.

Paypal for bits under £50, otherwise cash or bank transfer please.

The bike is complete at the moment, had a good final run out yesterday at Cadwell on it, so getting it stripped over the next week or so.

Making way for a new project!




Edited by Sideshow Pob - 02 November 2014 at 10:43

that is assuming they would fit an 08 model?

I'd love the forks ?

Ohlins Forks - £900
Motoholders race subframe - £260 only 6 weeks since bought brand new.
Aero Crash Bungs - £55
Engine protectors - £54 for both sides, left hand side worn down a little 'cos I leaned over too far!
Frame Bungs - £22 the pair
Front Spindle protectors - £30
Wheels - £850 with discs, cush drive, sprocket carrier and sprocket

All include P&P.

R&G parts will be in original packaging too.


Edited by Sideshow Pob - 29 October 2014 at 19:17

Forks have gone - sorry!!

PAUL WTF can't believe this is getting broke

Hopper wrote: How much for all the R&G protections pls

I can do the whole R&G list for £150 incl P&P

Aero bungs - good condition a few small marks but not crashed
front fork protectors - again good condition
engine case protectors (not the cover type, the slider type) - one side smoothed down a bit
paddock stand bobbins - used for paddock stand so marks where used but not crashed
Frame bungs - a bit of pretty stuff.

Right then, last chance for a few more bits of lovely 2012 CBR1000RR before they go to the Bay of E (where they will be more expensive to cover the outrageous costs of advertising on such a rip of market place)

Frame with V5
Swingarm
Yokes
Engine / throttle bodies / air box
New unused still in wrapper MWR air filter
Leo Vince Full System - Factory style titanium can - lurverly and road legal with the baffle.
Lust racing Jack up plates
SES rearsets (silver)
A pair of black new style wheels - yes they are still available! No front discs though.
Wheels spindles
Rear brake
Petrol tank
main wiring loom but not headlamp loom
New style clocks / dash (with 1999 miles on them)
Standard clip ons
Standard steering damper
Red Samco hoses with stainless steel fitting kit
Stock hoses and fittings available too
Radiator
Cush drive and sprocket carrier
1 tooth less front sprocket
ECU, keys, locks and HISS
Cuddly toy

Everything is mint condition, bike was only ridden in dry for under 2000 miles.

I think I was asking a little too much for them earlier although they really are in very good condition.

So now £600 including p&p.  Photos don't show the rear disc but I'll throw that in too.

There is a difference between the 08 kit and the 12 kit actually.  I'm pretty sure it's the lower radiator mount is different so this kit wont quite fit the 08-11 bikes.

Hi Paul, do you still have the petrol tank and it's fuel connector?

Edited by NikT - 11 December 2014 at 12:34

NikT wrote: Hi Paul, do you still have the petrol tank and it's fuel connector?

I do indeed. Are you after it with the fuel pump as well then with the pipe too?  It's all available but wont come with the petrol cap as that will go with the lock set of course.

I'm gonna have to duck out of the wheel purchase sorry :-(

NikT wrote: Sideshow Pob wrote: NikT wrote: Hi Paul, do you still have the petrol tank and it's fuel connector? I do indeed. Are you after it with the fuel pump as well then with the pipe too?  It's all available but wont come with the petrol cap as that will go with the lock set of course.   Hi, yeah just need the tank assuming its the same as the 08, (still crumpled from Cadwell )    and also the stupid quick release fuel pipe connector, as mine has broken (the blue bit you squeeze together to release has cracked) and is an absolute pain to disconnect.  Don't know whether you can disconnect it from the pipe, or need the whole pipe?   Cheers

That little blue clip is available from Honda for only a couple of quid.

Part number 17711-S0X-931 I believe.

I'd like to leave the one I have on the fuel pump as it sells as a complete unit that way, hope you don't mind.

But you are welcome to the petrol tank on it's own.