R6 parts mainly pre injection 5eb - sl - clearout |
Post Reply | Page 123> |
Author | ||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
Posted: 30 November 2014 at 20:06 |
|
As the bikes sold i,m now realising how many spare i,ve accrued over the last 4 years .
most of them not used by me but some have . My bike was 5eb (carbs) but i know some parts do fit the injected 5sl - try Ronayers.com online fiche for compatability. click on the link below for pics . i,ll put them on the bay in a couple a weeks or so all prices + post/ courier + offers .But would prefer collection(near peterborough) on larger items as its a ballache. or p.m me if any other bits u require i,ll see what i have . cheers . Pair of forks stock forks , unused by me but look straight in the bike few marks here and there £60 - SOLD R6 5eb pair of yokes top , bottom and steer stem ,unused by me bought with some spares . usual marks £30.00 - SOLD Bottom yoke and steer stem , unused by me , needs a clean £15 Rear subframes 3 off 1 supposedly tidy spar bought from ebay is nice and straight but the tank bolt wont go in but can cable tie on . 1 bit bent side to side but plenty serviceable for trackdays . 1 started to chop for mods but never used and is bit bent - all 3 £55 - SOLD Factory pro ignition advancer (for R6 5eb , carbs) NEW -still in box , never got it on the bike . these weren,t available new last time i looked.. £45 - SOLD swingarms x 2 - unused by me but came with some spares both have a few marks 1 has a small dent (near link pipe) £10 each stock rear shock , unused by me with link plates , would clean up £15 - SOLD Generator and cover complete bought and kept as a track spare never used by me , few marks £35 stator , pick up , timing cover and pick up complete , with diy reinforced cover and diy carbon slider . unused spare £24 - SOLD Full titanium system all on spring hooks apart from end can by ring clamp. End can is blue flame complete with baffle and retaining circlip. - END CAN - SOLD can has a few scuffs , system tidy apart from small dent near swingarm on the inner face , not visible on bike. Large part of can is 16" long - had a 2bhp gain on mine with this with a soft tune motor £120 - SYSTEM SOLD Scorpion slip on stainless steel end can, tidy with few marks - with removable baffle , ideal quiet can Its 51.5mm - 52mm internal diameter approx ,where i slips on the link . Can length approx 18" £45 - SOLD Micron end can and link pipe , the can fits the link with a ring clamp it fits onto standard headers . (really needs a new ring clamp headers end) its 51.5mm - 52mm internal diameter approx , where it slips on the link can length approx 18" 5/8 , few marks , would clean up . marked not for road use , no baffle £50 - SOLD High level link pipe only (fits standard headers) in stainless with heatshield never did get it fitted . no brackets either but google mig hi level exhaust i think . £15 CDI , igniter box , standard spare , unused by me £35 coil sticks x3 unused track spares £14 - SOLD carbs with velocity stacks and inlet maniold rubbers , bought as spares ran up once on the bike . £86 Harris front screen brace (fits stock clocks) - repaired , trackday spare £24 - SOLD front sprocket 520 renthal + 2 lock washers 1 new , 1 old .14 tooth. (also fits few other check in pic.) £12 Rear sprockets 520 Renthal lightweight x2 - 1 50 tooth , 1 - 48 tooth + sprocket carrier for 5eb £45 Double bubble screen clear , few marks ok track spare £14 - SOLD standard clocks , bought off here never used , looks a heat bubble on the exterior see pic , but tidy enough for t,days . untested by me but bought as working £12 - SOLD Clip ons , standard fit 5eb and 5sl i think . never used by me , bit marked up but o.k for t,days £15 Clutch - complete with tidy cover. £40 - SOLD Clutch basket £20 clutch lever , standard (might need to press the brass bush out and swap from from your exisitng lever) few marks , trackday spare £6 -SOLD front axle / spindle and spacers , would clean up £8 complete standard gearbox still in the old casings , £50?? crank / rods still in old casings £37 ?? pistons 4 all used £10 old casings buggered (cylinder cracks) and no head i,m afraid , cams are there though. K and N air filter , no rubber gasket ...... needs a service clean £5 stock headers , retaining rings are real furry tatty ! but could be cleaned up for track spares , pipes shabby but would clean up £10 Rear Sets - Cheapo rubbish !! that came on the bike ,i had to shim the shifter (no bearing) but complete with heel plates and lever so i kept as handy complete spares in my box - also fitted with Walter moto lift plates (these are handy to mount rearsets or stock pegs frther back / up) £30 Spare pro mach rear set lift plates £10 - SOLD oil pump, relief valve , pick up and ancillaries £10 -SOLD standard sump with level sensor - drain plug needs helicoil !! £8 starter motor £5 -SOLD water pump and hoses £8 -SOLD also realised i,ve got 2 front mudguard -SOLD pick up on larger items . cheers. Edited by 2stop - 03 December 2017 at 12:24 |
||
sam.nicholson
Starter Joined: 17 November 2014 Location: nottingham Status: Offline Points: 3 |
Post Options
Thanks(0)
|
|
Hi,
Would you take £24 including P&P for the Harris front screen brace? I'm also interested in the ignition advancer. Although not Factory Pro they sell for £19 on e-bay, they do exactly the same job, so £45 sounds a bit steep really. Would you do both delivered for £35? Thanks Sam |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
where u based let me know p.m
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
just had a look , does seem they are going for 20quid ,on the bay, it was bit more when i looked but that was 18 months ago ,so fair enough , hows £40 delivered ? |
||
koreanbaz
Instructor TDR No.1 Grass Joined: 16 December 2008 Location: Stockport Status: Offline Points: 132419 |
Post Options
Thanks(0)
|
|
Can you post a swingarm to Stockport please?
Myhermes takes days. But cheap as chips. For my project 👍 |
||
Life is not a trial run! |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Send ur address det,s Baz . (p.m) Have a look at pics , which u want or do u want me to sen d both and u can choose . |
||
koreanbaz
Instructor TDR No.1 Grass Joined: 16 December 2008 Location: Stockport Status: Offline Points: 132419 |
Post Options
Thanks(0)
|
|
pm sent |
||
Life is not a trial run! |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
I may be in Grantham sat a.m now briefly.
With some parts if this helps anyone else interested in anything. Cheers. |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Confirmed I will be there sat morn if this helps anyone else. P.m on here .cheers. Edited by 2stop - 05 December 2014 at 13:27 |
||
mozzer1962
Instructor Joined: 18 February 2010 Location: Greater Manchester Status: Offline Points: 1063 |
Post Options
Thanks(0)
|
|
hi have you still got the stator pick up cover
if so how much posted . mozzer
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
stator pickup and cover £24 as listed above -+ postage £4.00 |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Clutch and cover , ignition advancer and front fairing stay sold.
List ammended -see above-.. Clutch basket still available . P.m me for anything in case have , cheers. |
||
whalefish
Starter Joined: 12 January 2015 Location: birmingham Status: Offline Points: 7 |
Post Options
Thanks(0)
|
|
Hi, do you still have the titanium system?
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Yes mate supposed to be listing the lot on eBay at end of month before I get an earbashing. Click online gallery link above to view parts. |
||
whalefish
Starter Joined: 12 January 2015 Location: birmingham Status: Offline Points: 7 |
Post Options
Thanks(0)
|
|
i'll have it off you if you still have it at the end of the month, im skint untill pay day. my phone number is 07738604763 if you want to give me a call
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
O.k whalefish won,t go on eBay till end month .
U can send me a private message on here if u like .? I,ll keep a note of ur no. Roughly where u based ? |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Still got most of these bits .
Not had time to eBay it yet but trying to put them on next week. Go to the top of this post for the online gallery of all the bits n pieces . Or pm me for anyrhing in case I have it. Cheers. |
||
Wowey
intermediates Joined: 04 February 2010 Location: West Yorkshire Status: Offline Points: 110 |
Post Options
Thanks(0)
|
|
Messaged you about the end can
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Replied , deposit taken on that can . Sorry. |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
|
||
Boom34
Starter Joined: 19 September 2014 Location: Bromley Status: Offline Points: 18 |
Post Options
Thanks(0)
|
|
What make is the full titanium system?
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
That is the million dollar question ! Showed a few people , no one seems to know (no stamping) but has a blue flame can fitted with removable baffle. (did u view pics?) |
||
Ninjaboy
Racer Joined: 11 January 2015 Location: Strathaven Status: Offline Points: 566 |
Post Options
Thanks(0)
|
|
Still got the rearsets bud?
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Still got them , shocking quality and I would only say use as spares . Saying that I did shim them and run them on the bike with no probs until I got some tidy promachs . Did u see the lift / mount plates they are seperate they will lift and move back from stock position slightly . These are o.k , Walter moto I think . Should be in pics above if not pm and I will send pic. |
||
markyw4655
Starter Joined: 04 March 2015 Location: hereford Status: Offline Points: 3 |
Post Options
Thanks(0)
|
|
do you still have the front fenders? how much do you want for them?
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Still got em I will p.m u pics and prices 2nite when I get in.
|
||
markyw4655
Starter Joined: 04 March 2015 Location: hereford Status: Offline Points: 3 |
Post Options
Thanks(0)
|
|
Nice one.. |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
p.m with fender pics sent to markyw .
|
||
Wurley
fast Group Joined: 19 March 2015 Location: St Neots Status: Offline Points: 461 |
Post Options
Thanks(0)
|
|
Hi there do you still have the carbs & would you accept £50 for them ? ? ?
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Pm sent wurley
|
||
ctowers1
Racer Joined: 04 March 2012 Location: North Yorkshire Status: Offline Points: 519 |
Post Options
Thanks(0)
|
|
PM coming
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Clutch lever , stator pick up , screen and subframes reserved for ctowers , will update list later.
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
These now sold and main parts list with items sold updated at the top of the post. Ti system now reduced £120 as has no end can with it as that was sold seperately .. also found a spare nosecone the other week , has had an "ear" repaired but plenty serviceable painted and lacquered white with red stripe . |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Still got lotta bits , see above .
The micron can and link still available and carbs . Also got a clutch basket , no cover. Bttt for gallery pics or ask in case it was a late clear out find and not in the list , cheers. |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
[QUOTE=2stop] Still got lotta bits , see above .
The micron can and link still available and carbs . Also got a clutch basket , no cover. Bttt for gallery pics or ask in case it was a late clear out find and Not in the pics. Still got forks and yokes, micron can and link , to system (the micron will slip on it if need both) swingarms, stock shock, generator and cover, igniter box / ecu , hi level link pipe, cheapo rear sets , 2 sets of peg lift plates , stock clip ons ,sprockets 520 , front 14t , rears 48 , 50 and rear carrier, stock clocks , front axle and spacers , sidestand. Gearbox , crank n rods , pistons. All collect near Peterborough or post (see top if thread) or poss take to next t'day . Converting into newer r6 parts l.o.l.. |
||
Fandoracing
Racer Joined: 16 May 2015 Location: Scotland Status: Offline Points: 918 |
Post Options
Thanks(0)
|
|
Does the 5eb shock fit the 5sl? Tried using that Ron site but not sure
|
||
#nailit
|
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
L.o.l me too , not sure on that mate but the 5sl is a different.swingarm. Out of interest (no good to u I know) the r6 06 2c0 model and r6 13s (09 to current) are the same. Try putting a post on here , tony parkitt or Colin 100% suspension would be able to tell you. |
||
R6_lad
Racer Joined: 01 May 2014 Location: London Status: Offline Points: 873 |
Post Options
Thanks(0)
|
|
Do the rear set lift plates just work with the standard rear sets? Do you know how much they raise and pull back the rear sets? I'll take a set of you as mine could do with going up and back a little.
Cheers, Kam |
||
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
|
Think they would work with standard rsets but I had aftermarkets I will have a look 2moro n post back on here.
|
||
R6_lad
Racer Joined: 01 May 2014 Location: London Status: Offline Points: 873 |
Post Options
Thanks(0)
|
|
Thanks mate. |
||
Post Reply | Page 123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |