Trackday Riders Homepage
Forum Home Forum Home > TDR ADVERTISER > Commercial Adverts > UK Race Support
  New Posts New Posts RSS Feed - Bazzaz Kits
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Topic ClosedBazzaz Kits

 Post Reply Post Reply
Author
Message
UK Race Support View Drop Down
Racer
Racer
Avatar
Site Sponsor - Bikes Parts

Joined: 27 October 2011
Location: Chesterfield
Status: Offline
Points: 851
Direct Link To This Post Topic: Bazzaz Kits
    Posted: 20 December 2011 at 14:42

Z-Fi Fuel Control

The Bazzaz Z-Fi Fuel Control Unit takes operational command of all fuel injectors not just half like our competitors. This is a significant advantage in realizing the perfect tune, resulting in significantly better throttle response and overall engine performance. Z-Fi is a plug and play unit that piggy-backs onto the stock ECU. Each unit comes with an application specific harness that utilizes OEM connectors for simple installation, and comes pre-programmed for either the stock exhaust or a slip-on. Featuring a USB interface with industry recognized easy to use software, the Z-Fi can be tuned at the bike OR because the system can be USB powered, tuning can be done at a PC. Tune to perfection. Use the Z-AFM self tuning module with the Z-Fi unit.

All Products are for Closed Race Course Use Only.

Click link above to go back to find your bike and purchase.

Z-Fi

Z-Fi QS

The Z-Fi QS (Fuel Control + Quick Shift) integrates all the same features of the Z-Fi controller with a more advanced version of the popular Bazzaz QS4 Quick Shift all in one unit. Customer feedback on the QS4 led Bazzaz to develop a new shift sensor for further improved reliability, which now also includes an application specific shift rod for ease of installation. The Z-Fi QS unit employs race proven technology for seamless, full throttle, clutchless up shifting. Tune the Quick Shift with user adjustable, gear dependent kill times allowing for optimal shifting in all gears. Being able to tune with independent cut times for each shift point provides smoother, faster shifting, and less wear on the transmission compared to the competition, who by the way offers only one cut time resulting in premature transmission wear. The kit comes complete with control unit, harnessing, shift switch and shift rod. Features: All the same features of the Z-Fi Full throttle, clutchless up shifting results in faster lap times & more fun Rugged shift sensor with application specific adapter rods for easy installation Gear dependent kill times for optimal shifting at all shift points.

All Products are for Closed Race Course Use Only.

Click link above to go back to find your bike and purchase.

Quick Shift

Z-Fi TC

The Z-Fi TC (Fuel Control + Quick Shift + Traction Control) unit has all of the same features as the Z-Fi QS with the addition of user adjustable traction control.

The Z-Fi TC offers up traction control technology derived from the highest levels of professional racing to all levels of riders or racers desiring the ultimate in technology, pure fun and advantage over the competition. The Z-Fi TC does not require any additional sensors to be mounted to the bike. Because the Z-Fi TC provides such an advantage in performance it is not legal in some racing series but is legal for most competition.

Countless hours of racetrack testing and tuning were used to distill the complicated nature of this technology into a simple and intuitive tuning interface using the Z-Fi software. Traction control is easily adjusted by Throttle Position, RPM, and Gear to suit any track, riding condition and riding style. Currently the Z-Fi TC system is run by top Superbike teams around the world including Jordan Suzuki, M4 Monster Energy Suzuki, and others who run the system secretely and request not to be listed publicly. Now you can own the secret.

Adjustments can be made 'on the fly' with an optional TC adjust switch, making tuning even more simple.

Features:

  • All the same features of the Z-Fi QS
  • State of the art Traction Control technology for faster lap times, better control, & more excitement
  • Adjustable by Throttle Position, RPM and Gear for ideal performance
  • Intuitive software interface for easy tuning
  • Uses stock sensors only

All Products are for Closed Race Course Use Only.

Click link above to go back to find your bike and purchase.

Traction Control

Z-AFM Self-Mapping

Dyno or no dyno, pre-made and shared maps are a thing of the past. To harness the full potential of a fuel control module like the Bazzaz Z-Fi, the Z-AFM takes all the present conditions into account to create on-demand custom maps. Even better, the Bazzaz Z-AFM is not closed loop like so many competitors. The proactive system quickly generates working maps, eliminating the need for constant adjustment that occurs with a closed loop system. This ensures accurate fuel delivery on-demand. The optional Z-AFM (Air Fuel Mapping) kit consists of an air fuel sensor and amplifier box that plugs into any of the Z-Fi products and allows for custom self-mapping of the motorcycle. Custom self-mapping means that as the user rides the bike, on the track or on a dynamometer, the Z-Fi automatically calculates the required fuel adjustment at each RPM and Throttle Position to reach the user selected target air fuel ratio. The Z-Fi Mapper software allows for the user to easily enter a single or multiple target air fuel ratio, start, stop, and review the results of the self-mapping function. Once the recommended adjustments have been reviewed, the user can either apply all of the suggested adjustments or fine tune to create their own custom fuel map with a few simple clicks of the mouse. The Z-AFM kit offers an alternative way for mapping without the time or cost of a custom dyno tune. For the rider looking for maximum performance, a dyno tune together with the Z-AFM is the way to go. The kit comes with all of the required hardware, but may require modification of the exhaust pipe to accept the air fuel sensor fitting. Many exhaust manufacturers make versions of their existing pipes with the sensor fitting already built in.

Features:

  • Plug and Play installation with any of the Z-Fi products (may require pipe modification to accept sensor)
  • Allows for self-mapping either on the track or on the dyno
  • Allows an alternative way for mapping without the time or cost of a custom dyno tune
  • "Smoothing" feature, further enhances throttle response and power delivery
  • User adjustable, multiple target air fuel ratios for performance and fuel economy

All Products are for Closed Race Course Use Only.

Click link above to go back to find your bike and purchase.

Self Map

Z-Bomb

The Z-Bomb Honda is a Timing Retard Calibrator that maximizes engine performance for up to a 7 HP gain over stock. That's a pretty impressive power boost for the price. The simple, plug in unit installs in minutes with just a screwdriver and a 5mm hex key. The Z-Bomb integrates perfectly with all the Z-Fi EMS products as well as other aftermarket tuning units.

Gains 5-7 HP over stock Plugs in-line with TPS (Throttle Position Sensor)

Easy to Install with just a screwdriver and a 5mm hex key The dyno graph below clearly shows the significant power gain over a 2,000 RPM range:

The Z-Bomb Suzuki is a Top Speed Eliminator that also improves throttle response. The simple plug in unit installs in minutes with just a screwdriver and a 5mm hex key. The Z-Bomb integrates perfectly with all the Z-Fi EMS products as well as other aftermarket tuning units.

Improves throttle response

Eliminates top speed (185mph) speed limiter

Accurate gear indicator 1st - 5th gear

Can be used by itself or with aftermarket EMS

Plugs in-line with GPS (Gear Position Sensor)

Street Legal

Click link above to go back to find your bike and purchase.

Z-Bomb
Graph

QS4 USB

The QS4 USB (Stand Alone Quick Shift) is an updated version of the popular Bazzaz QS-4 Quick Shift. Customer feedback on the QS-4 led to the development of a new shift sensor for improved reliability, which now also includes an application specific adapter rod for easy installation. The QS4 USB unit employs race proven technology for seamless clutchless up shifting. It has user adjustable gear dependent kill times allowing for optimal shifting in all gears. The kit comes complete with control unit, harnessing, shift switch and adapter rod. The software allows the user to set a signal to indicate to the rider precise shift points using the optional shift light sold separately.

Features:

  • Full power clutchless up shifting results are faster lap times
  • Rugged shift sensor with application specific adapter rods for easy installation
  • Gear dependent kill times for optimal shifting in all gears
  • Gear learning capable

All Products are for Closed Race Course Use Only.

Click link above to go back to find your bike and purchase.

QS

EXUP Eliminator - Yamaha

The EXUP Eliminator is a simple plug-and-play application. Allows the removal of the EXUP valve and motor without setting the dreaded Check Engine light when using a full racing exhaust. It furthers the weight savings after EXUP removal and allows for a cleaner appearance.

Ducati O2 Eliminator

Ducati O2 Eliminator. A simple plug-and-play application, The Bazzaz O2 Eliminator for Ducati allows you to tune the bike throughout the entire RPM & Throttle position range. The Ducati O2 eliminator allows the removal of the stock O2 sensor without triggering the “FI” fault light on the dash. It also stabilizes the AFR (fuel delivery) which would otherwise become very unstable without the sensor or Bazzaz eliminator installed. If the Bazzaz O2 eliminator is not used when the stock sensor is removed, the stock ECU will lean out the bike, which results in poor performance and also may harm the engine. In addition, the Bazzaz O2 eliminator can be used with any brand of engine management system, which typically do not allow for fuel map adjustments within the following range of operation: 0-20% throttle and 0-6000RPM.

Click link above to go back to find your bike and purchase.

Elim

Map Selection Switch

Handlebar mounted switch for convenient toggling between 2 maps. For example, a fuel efficient map, rain map, or a full power map. [Part No. 127078] Note: For use with the Z-Fi, Z-Fi MX, Z-Fi QS and Z-Fi TC.

Click link above to go back to find your bike and purchase.

Map

Traction Control Adjustment and Map Selection Switch

Handlebar mounted switch for easy, on the fly, traction control adjustments and map switching. [Part No. 127079] Note: Traction Control / Map Select Switch for use with Z-Fi TC only.

Click link above to go back to find your bike and purchase.

TC
  

See our website to find your bike application http://www.ukracesupport.co.uk



Back to Top
UK Race Support View Drop Down
Racer
Racer
Avatar
Site Sponsor - Bikes Parts

Joined: 27 October 2011
Location: Chesterfield
Status: Offline
Points: 851
Direct Link To This Post Posted: 27 April 2012 at 08:38
Free dyno set up on all Z-Fi TC kits sold till the  end of May.
Back to Top
Rainey View Drop Down
Instructor
Instructor
Avatar

Joined: 16 January 2011
Location: Cheshire
Status: Offline
Points: 1563
Direct Link To This Post Posted: 27 April 2012 at 09:03
Have you got a price for a TC one and just a QS one on an 09 ZX10 please.
Back to Top
UK Race Support View Drop Down
Racer
Racer
Avatar
Site Sponsor - Bikes Parts

Joined: 27 October 2011
Location: Chesterfield
Status: Offline
Points: 851
Direct Link To This Post Posted: 27 April 2012 at 09:25
Z-Fi (Fuel Control) - £290.00 
Z-Fi QS (Fuel Control & Quick Shifter) - £540.00 
Z-Fi TC (Fuel Control, Quick Shifter & Traction Control) - £715.00 
Z-AFM Self Mapping (add-on for above) - £260.00 
Map Selection Switch - £60.00 
TC & Map Selection Switch - £115.00

http://www.ukracesupport.co.uk/kawasakizx10.htm
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 11.10
Copyright ©2001-2017 Web Wiz Ltd.

This page was generated in 0.109 seconds.