Print Page | Close Window

Attack Performance Products

Printed From: Trackday Riders
Category: TDR ADVERTISER
Forum Name: UK Race Support
Forum Description: Your One Stop Shop For Road and Race Spares.
URL: http://www.trackdayriders.co.uk/tdr/forum/forum_posts.asp?TID=24312
Printed Date: 21 November 2018 at 04:33
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Attack Performance Products
Posted By: UK Race Support
Subject: Attack Performance Products
Date Posted: 03 February 2012 at 16:55
We are now authorized Attack Performance retailers.
AP are a big name in the USA, producing rearsets, yokes, Clip ons & paddock stand pick-ups.

We havent managed to add there products to our site yet so please contact us with your requirements.
Parts for most sports bikes.




-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk



Replies:
Posted By: Spliffyaid
Date Posted: 03 February 2012 at 19:25
"shakes head" and shakes credit card to cool it down for another blasting :D

-------------


Posted By: BONGO
Date Posted: 03 February 2012 at 19:29
like the look of those rearsets

-------------
Thundersport GB Superstock 1000 #177


Posted By: Copo
Date Posted: 03 February 2012 at 19:51
Originally posted by BONGO BONGO wrote:

like the look of those rearsets



+1 they look great! And look really tough and adjustable.

-------------

Wirral 100 Minitwins #90


Posted By: Spliffyaid
Date Posted: 03 February 2012 at 19:54
Its all mint gear! Go on a few US/OZ forums and AP are pretty much what Ten Kate etc are over here...........or HRC etc

Sharp intake of breath..............and i dont need nuffing fanks :D 

-------------


Posted By: UK Race Support
Date Posted: 03 February 2012 at 20:08




-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: Copo
Date Posted: 03 February 2012 at 20:23
They're like tiny little transformers

Ok, so, err, how much roughly (or exactly if you like )

-------------

Wirral 100 Minitwins #90


Posted By: UK Race Support
Date Posted: 03 February 2012 at 21:13
Name your bike?

-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: Copo
Date Posted: 03 February 2012 at 21:27
Erm, potentially a SV650...
 
Or 07 Hornet


-------------

Wirral 100 Minitwins #90


Posted By: BONGO
Date Posted: 03 February 2012 at 22:33
best part of 500 USD...  fecking expensive as always for rearsets!

-------------
Thundersport GB Superstock 1000 #177


Posted By: UK Race Support
Date Posted: 03 February 2012 at 22:44
£375 for the S1000RR

-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: Copo
Date Posted: 03 February 2012 at 22:48
Expensive, but perfectly formed!

-------------

Wirral 100 Minitwins #90


Posted By: BONGO
Date Posted: 03 February 2012 at 22:48
They are works of art. Why are rearsets always so expensive though, Nearly always over £300. when they're only machined like many other things that cost much less. Genuine question that too. Do their designs require special machining or something?

-------------
Thundersport GB Superstock 1000 #177


Posted By: Spliffyaid
Date Posted: 04 February 2012 at 07:16
Go on.........Yokes for a 2011 zx10r :D 

-------------


Posted By: UK Race Support
Date Posted: 04 February 2012 at 08:28
Originally posted by Spliffyaid Spliffyaid wrote:

Go on.........Yokes for a 2011 zx10r :D 

£535 for these.  Baring in mind its me paying import duty and tax.


-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: Matty21
Date Posted: 04 February 2012 at 10:10
wow expensive, but oh so pretty !

-------------
Matty Laws Racing. Will be racing an mz250 with Bemsee in 2018.

Team MLR


Posted By: BONGO
Date Posted: 04 February 2012 at 10:10
Proper bling!

-------------
Thundersport GB Superstock 1000 #177


Posted By: Matty21
Date Posted: 04 February 2012 at 10:34
i feel like i should buy them, put a big gold chain around my neck and hang them ! That will show all these gangster types where the real money is at haha

-------------
Matty Laws Racing. Will be racing an mz250 with Bemsee in 2018.

Team MLR


Posted By: Steelie
Date Posted: 04 February 2012 at 11:09
Originally posted by BONGO BONGO wrote:

They are works of art. Why are rearsets always so expensive though, Nearly always over £300. when they're only machined like many other things that cost much less. Genuine question that too. Do their designs require special machining or something?
 
No special machining "just" cnc machining centre. Trouble is someone has had to invest in that and charge out at a cost make a ROI.
 
Take the Hanger plate.
 
Time to measure and draw - 1day @ £400.00
Time to Program - 1 hr @ £50
Material - £1.00
Base on a batch of 100off
Material =£100
Draw and prog £450
Machine time each = 5mins x 100 = 500mins + set up 45mins = 545mins
De burr batch time 60mins
Inspect 60mins
545 + 60 + 60 = 665mins divide by 60 = 11hrs 5 mins x £45 hr = £495.00 plus £451.00 = £946.00 = £1016.00
Plus andodise @ £70.00 batch = £1086.00
Plus £ 30.00 transport = £1116.00
 
Divide by 100 = £11.16 each cost
Machinist wants 60% on top = £17.86
Reatailer wants 100% =£35.72 each retail price to you the customer.
 
Or buy in from China for 30% of the manufacturing cost pay some import duty and make 120% on top.
 
I'm out of touch with modern cnc program software but I know it's a hell of a lot quicker than when I used to do it.
 
The above isn't exact but if you work the parts out across the assembly you can see where the costs come in.
 
You also have to realise some of the parts are model specific and some are common across all models so batch sizes will be higher and the part will have a longer life.
 
The manufacturer has to work out how long a life his product may have in the market and how manyhe is likely to sell.
 
Sorry a bit off topic!!oops
 
 


-------------




Posted By: BONGO
Date Posted: 04 February 2012 at 11:12
Very interesting to see a break down! Sorry UKRS for the thread going off on a tangent! Although it's staying at the top of the page!




-------------
Thundersport GB Superstock 1000 #177


Posted By: UK Race Support
Date Posted: 04 February 2012 at 12:56
Interesting breakdown.
You did however forget to add the cost of equipment, purchase of somewhere to put the equipment, rates, heating and lighting bills, bank charges on the interest for the loan to buy all the equipment and on and on.
Then should you be lucky enough to sell at a profit the bloody taxman wants his pound of Titanium off you.

Theres a guy near me make rearsets from his mums garage.  He charges £550 upwards for a set!

All that said they are a work of art and I love em on my Daytona.  Problem is everytime I load her in the van I catch my leg on the pegs and always manage to rip my jeans on the sharp pegs!  But they grip when it counts and thats all that matters.


-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: Steelie
Date Posted: 04 February 2012 at 13:33
Yes the Retailer costs were not broken down the above was more to highlight the engineering costs.  Which also contain things like training courses, health and safety, enviromental waste costs etc,etc. It's a wonder anyone ever sets up in business!!
Unfortunately Motorcycle race parts are pretty low volume when compared to some like a company making say replacement standard car brake discs where they would expect much higher volume.
 
 


-------------




Posted By: UK Race Support
Date Posted: 06 February 2012 at 10:13
Originally posted by Copo Copo wrote:

Erm, potentially a SV650...
 
Or 07 Hornet



SV650 £277.00


-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: UK Race Support
Date Posted: 06 February 2012 at 10:17
Aprilia RSV4 AP Rearsets
BMW S1000RR AP Rearsets
BMW S1000RR Triple Clamps
Ducati 848/1098/1198 AP Rearsets
Ducati 848/1098/1198 Triple Clamps
Honda CBR600RR AP Rearsets
Honda CBR1000RR AP Rearsets
Honda CBR1000RR AP Triple Clamps
Kawasaki ZX-R6 AP Rearsets
Kawasaki ZX-R6 AP Triple Clamps
Kawasaki ZXR10 AP Rearsets
Kawasaki ZXR10 AP Triple Clamps
Suzuki SV650
Suzuki GSX-R600/750/1000 AP Rearsets
Suzuki GSX-R600/750/1000 AP Triple Clamps
Yamaha R6/R1 AP Rearsets
Yamaha R6/R1 AP Triple Clamps
Triumph Daytona & Street Triple AP Rearsets
Triumph Daytona AP Triple Clamps

One thing I've not mentioned is the ability to convert from race to road pattern on many models.  Its simply a case of moving a link on the back of the rearset gear lever and jobs done.



-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: monkeh
Date Posted: 06 February 2012 at 12:16
Do you make rearsets for the CBR600F Sport?


Posted By: scooby8272
Date Posted: 06 February 2012 at 12:26
Fooking nice kit......    where's my cc


Posted By: racesparesuk
Date Posted: 06 February 2012 at 14:49
I can highly recommend the yokes. Got a set on my R1. absolute work of art

-------------
Suppliers of quality new and used race bike spares and bikes
Tel 01704 840825


Posted By: monkeh
Date Posted: 08 February 2012 at 11:18
Do you make Adjustable rearsets for the CBR600F Sport?
I tried to pm but your inbox is full.


Posted By: UK Race Support
Date Posted: 08 February 2012 at 14:00
Hi Monkey,

I'll clear my inbox.  Sorry not as yet.  I will see if Ron Haslam is having any made for his race school bikes.


-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: monkeh
Date Posted: 08 February 2012 at 14:33
Thanks for the reply. thumbsup


Posted By: andirsv
Date Posted: 09 February 2012 at 12:26
Ukrs.............what about an '02 Rsv Mille?????

-------------
Go big or go home!!!


Posted By: UK Race Support
Date Posted: 09 February 2012 at 13:16
Sorry no AP ones for the 02 :-(

We do Bonamici ones for it at £259.00 shipped.


-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: tws_750
Date Posted: 09 February 2012 at 15:52
:( wish I knew before I bought Arrows


Posted By: andirsv
Date Posted: 09 February 2012 at 19:58
Originally posted by UK Race Support UK Race Support wrote:

Sorry no AP ones for the 02 :-(

We do Bonamici ones for it at £259.00 shipped.
 
Cheers buddy, but would need a set that relocate the rear master cylinder as the rear brake is pish!!!!:D


-------------
Go big or go home!!!


Posted By: UK Race Support
Date Posted: 21 February 2012 at 14:55
As used by Chaz Davies.



-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: fringe80
Date Posted: 16 March 2012 at 23:59
price for 2008 zx10r triple clamps but running ohlins gas forks??? so 52mm/58mm clamps
cheers Lee 

-------------
http://www.mybannermaker.com" rel="nofollow">


Posted By: UK Race Support
Date Posted: 17 March 2012 at 08:30
Originally posted by fringe80 fringe80 wrote:

price for 2008 zx10r triple clamps but running ohlins gas forks??? so 52mm/58mm clamps
cheers Lee 

Hi Lee, I will have to check with AP as to if they cover those sizes on the ZX.  I know they do for the Ducati range so fingers crossed.  What yokes do you have on at the moment?


-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: Spliffyaid
Date Posted: 17 March 2012 at 08:46
Originally posted by fringe80 fringe80 wrote:

price for 2008 zx10r triple clamps but running ohlins gas forks??? so 52mm/58mm clamps
cheers Lee 



whistle Stick with it Fringe................ thumbsup



-------------


Posted By: fringe80
Date Posted: 17 March 2012 at 10:30
spliffyaids hawk ones.........just a price guide mate....
ade i don't have any hands left rofl and forearms are like popeyes :D 

-------------
http://www.mybannermaker.com" rel="nofollow">


Posted By: UK Race Support
Date Posted: 20 March 2012 at 16:29
Ok I have a price for the ZX10 Yokes.
Sit down!

RRP is £946.00 I will PM you with more details.


-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk


Posted By: UK Race Support
Date Posted: 11 September 2012 at 20:55
Prices dropped. Please call for best deals.

-------------

http://www.ukracesupport.co.uk - http://www.ukracesupport.co.uk



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net