R6 parts mainly pre injection 5eb - sl - clearout
Printed From: Trackday Riders
Category: TDR ADVERTISER
Forum Name: For Sale
Forum Description: members only ads for bikes and parts for sale. Non-bike related in 'General For Sale' section please.
URL: http://www.trackdayriders.co.uk/tdr/forum/forum_posts.asp?TID=51986
Printed Date: 19 April 2024 at 14:03
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: R6 parts mainly pre injection 5eb - sl - clearout
Posted By: 2stop
Subject: R6 parts mainly pre injection 5eb - sl - clearout
Date Posted: 30 November 2014 at 20:06
|
As the bikes sold i,m now realising how many spare i,ve accrued over the last 4 years . most of them not used by me but some have . My bike was 5eb (carbs) but i know some parts do fit the injected 5sl - try Ronayers.com online fiche for compatability. click on the link below for pics . i,ll put them on the bay in a couple a weeks or so all prices + post/ courier + offers .But would prefer collection(near peterborough) on larger items as its a ballache. or p.m me if any other bits u require i,ll see what i have . cheers . taa. https://plus.google.com/photos/104525823930643323718/albums/6087414861410565889 - https://plus.google.com/ Pair of forks stock forks , unused by me but look straight in the bike few marks here and there £60 - SOLD R6 5eb pair of yokes top , bottom and steer stem ,unused by me bought with some spares . usual marks £30.00 - SOLD Bottom yoke and steer stem , unused by me , needs a clean £15 Rear subframes 3 off 1 supposedly tidy spar bought from ebay is nice and straight but the tank bolt wont go in but can cable tie on . 1 bit bent side to side but plenty serviceable for trackdays . 1 started to chop for mods but never used and is bit bent - all 3 £55 - SOLD Factory pro ignition advancer (for R6 5eb , carbs) NEW -still in box , never got it on the bike . these weren,t available new last time i looked.. £45 - SOLD swingarms x 2 - unused by me but came with some spares both have a few marks 1 has a small dent (near link pipe) £10 each stock rear shock , unused by me with link plates , would clean up £15 - SOLD Generator and cover complete bought and kept as a track spare never used by me , few marks £35 stator , pick up , timing cover and pick up complete , with diy reinforced cover and diy carbon slider . unused spare £24 - SOLD Full titanium system all on spring hooks apart from end can by ring clamp. End can is blue flame complete with baffle and retaining circlip. - END CAN - SOLD can has a few scuffs , system tidy apart from small dent near swingarm on the inner face , not visible on bike. Large part of can is 16" long - had a 2bhp gain on mine with this with a soft tune motor £120 - SYSTEM SOLD Scorpion slip on stainless steel end can, tidy with few marks - with removable baffle , ideal quiet can Its 51.5mm - 52mm internal diameter approx ,where i slips on the link . Can length approx 18" £45 - SOLD Micron end can and link pipe , the can fits the link with a ring clamp it fits onto standard headers . (really needs a new ring clamp headers end) its 51.5mm - 52mm internal diameter approx , where it slips on the link can length approx 18" 5/8 , few marks , would clean up . marked not for road use , no baffle £50 - SOLD High level link pipe only (fits standard headers) in stainless with heatshield never did get it fitted . no brackets either but google mig hi level exhaust i think . £15 CDI , igniter box , standard spare , unused by me £35 coil sticks x3 unused track spares £14 - SOLD carbs with velocity stacks and inlet maniold rubbers , bought as spares ran up once on the bike . £86 Harris front screen brace (fits stock clocks) - repaired , trackday spare £24 - SOLD front sprocket 520 renthal + 2 lock washers 1 new , 1 old .14 tooth. (also fits few other check in pic.) £12 Rear sprockets 520 Renthal lightweight x2 - 1 50 tooth , 1 - 48 tooth + sprocket carrier for 5eb £45 Double bubble screen clear , few marks ok track spare £14 - SOLD standard clocks , bought off here never used , looks a heat bubble on the exterior see pic , but tidy enough for t,days . untested by me but bought as working £12 - SOLD Clip ons , standard fit 5eb and 5sl i think . never used by me , bit marked up but o.k for t,days £15 Clutch - complete with tidy cover. £40 - SOLD Clutch basket £20 clutch lever , standard (might need to press the brass bush out and swap from from your exisitng lever) few marks , trackday spare £6 -SOLD front axle / spindle and spacers , would clean up £8 complete standard gearbox still in the old casings , £50?? crank / rods still in old casings £37 ?? pistons 4 all used £10 old casings buggered (cylinder cracks) and no head i,m afraid , cams are there though. K and N air filter , no rubber gasket ...... needs a service clean £5 stock headers , retaining rings are real furry tatty ! but could be cleaned up for track spares , pipes shabby but would clean up £10 Rear Sets - Cheapo rubbish !! that came on the bike ,i had to shim the shifter (no bearing) but complete with heel plates and lever so i kept as handy complete spares in my box - also fitted with Walter moto lift plates (these are handy to mount rearsets or stock pegs frther back / up) £30 Spare pro mach rear set lift plates £10 - SOLD oil pump, relief valve , pick up and ancillaries £10 -SOLD standard sump with level sensor - drain plug needs helicoil !! £8 starter motor £5 -SOLD water pump and hoses £8 -SOLD also realised i,ve got 2 front mudguard -SOLD pick up on larger items . cheers. |
Replies:
Posted By: sam.nicholson
Date Posted: 01 December 2014 at 09:37
|
Hi, Would you take £24 including P&P for the Harris front screen brace? I'm also interested in the ignition advancer. Although not Factory Pro they sell for £19 on e-bay, they do exactly the same job, so £45 sounds a bit steep really. Would you do both delivered for £35? Thanks Sam |
Posted By: 2stop
Date Posted: 01 December 2014 at 18:58
| where u based let me know p.m |
Posted By: 2stop
Date Posted: 01 December 2014 at 19:23
just had a look , does seem they are going for 20quid ,on the bay, it was bit more when i looked but that was 18 months ago ,so fair enough , hows £40 delivered ? |
2stop wrote:Posted By: koreanbaz
Date Posted: 01 December 2014 at 19:37
|
Can you post a swingarm to Stockport please? Myhermes takes days. But cheap as chips. For my project 👍 -------------   Life is not a trial run! |
Posted By: 2stop
Date Posted: 02 December 2014 at 07:17
Send ur address det,s Baz . (p.m) Have a look at pics , which u want or do u want me to sen d both and u can choose . |
Posted By: koreanbaz
Date Posted: 02 December 2014 at 07:54
pm sent  ------------- Life is not a trial run! |
Posted By: 2stop
Date Posted: 02 December 2014 at 21:07
|
I may be in Grantham sat a.m now briefly. With some parts if this helps anyone else interested in anything. Cheers. |
Posted By: 2stop
Date Posted: 05 December 2014 at 13:26
Confirmed I will be there sat morn if this helps anyone else. P.m on here .cheers. |
Posted By: mozzer1962
Date Posted: 06 December 2014 at 15:55
|
hi have you still got the stator pick up cover
if so how much posted . mozzer
|
Posted By: 2stop
Date Posted: 06 December 2014 at 16:26
stator pickup and cover £24 as listed above -+ postage £4.00 |
Posted By: 2stop
Date Posted: 08 December 2014 at 18:56
|
Clutch and cover , ignition advancer and front fairing stay sold. List ammended -see above-.. Clutch basket still available . P.m me for anything in case have , cheers. |
Posted By: whalefish
Date Posted: 12 January 2015 at 21:57
| Hi, do you still have the titanium system? |
Posted By: 2stop
Date Posted: 13 January 2015 at 20:10
Yes mate supposed to be listing the lot on eBay at end of month before I get an earbashing. Click online gallery link above to view parts. |
Posted By: whalefish
Date Posted: 14 January 2015 at 08:54
| i'll have it off you if you still have it at the end of the month, im skint untill pay day. my phone number is 07738604763 if you want to give me a call |
Posted By: 2stop
Date Posted: 14 January 2015 at 18:28
|
O.k whalefish won,t go on eBay till end month . U can send me a private message on here if u like .? I,ll keep a note of ur no. Roughly where u based ? |
Posted By: 2stop
Date Posted: 13 February 2015 at 08:32
|
Still got most of these bits . Not had time to eBay it yet but trying to put them on next week. Go to the top of this post for the online gallery of all the bits n pieces . Or pm me for anyrhing in case I have it. Cheers. |
Posted By: Wowey
Date Posted: 17 February 2015 at 12:22
| Messaged you about the end can |
Posted By: 2stop
Date Posted: 17 February 2015 at 18:28
Replied , deposit taken on that can . Sorry. |
Posted By: 2stop
Date Posted: 17 February 2015 at 18:29
|
Posted By: Boom34
Date Posted: 17 February 2015 at 22:59
| What make is the full titanium system? |
Posted By: 2stop
Date Posted: 18 February 2015 at 08:55
That is the million dollar question ! Showed a few people , no one seems to know (no stamping) but has a blue flame can fitted with removable baffle. (did u view pics?) |
Posted By: Ninjaboy
Date Posted: 18 February 2015 at 21:34
| Still got the rearsets bud? |
Posted By: 2stop
Date Posted: 19 February 2015 at 08:33
Still got them , shocking quality and I would only say use as spares . Saying that I did shim them and run them on the bike with no probs until I got some tidy promachs . Did u see the lift / mount plates they are seperate they will lift and move back from stock position slightly . These are o.k , Walter moto I think . Should be in pics above if not pm and I will send pic. |
Posted By: markyw4655
Date Posted: 04 March 2015 at 22:23
| do you still have the front fenders? how much do you want for them? |
Posted By: 2stop
Date Posted: 05 March 2015 at 07:30
| Still got em I will p.m u pics and prices 2nite when I get in. |
Posted By: markyw4655
Date Posted: 05 March 2015 at 08:46
|
Nice one.. |
Posted By: 2stop
Date Posted: 05 March 2015 at 19:21
| p.m with fender pics sent to markyw . |
Posted By: Wurley
Date Posted: 19 March 2015 at 12:07
| Hi there do you still have the carbs & would you accept £50 for them ? ? ? |
Posted By: 2stop
Date Posted: 19 March 2015 at 20:40
|
Pm sent wurley |
Posted By: ctowers1
Date Posted: 20 March 2015 at 16:33
|
PM coming
|
Posted By: 2stop
Date Posted: 23 March 2015 at 06:47
|
Clutch lever , stator pick up , screen and subframes reserved for ctowers , will update list later. |
Posted By: 2stop
Date Posted: 31 March 2015 at 19:47
These now sold and main parts list with items sold updated at the top of the post. Ti system now reduced £120 as has no end can with it as that was sold seperately .. also found a spare nosecone the other week , has had an "ear" repaired but plenty serviceable painted and lacquered white with red stripe . |
Posted By: 2stop
Date Posted: 10 May 2015 at 09:38
|
Still got lotta bits , see above . The micron can and link still available and carbs . Also got a clutch basket , no cover. Bttt for gallery pics or ask in case it was a late clear out find and not in the list , cheers. |
Posted By: 2stop
Date Posted: 22 May 2015 at 19:44
|
[QUOTE=2stop] Still got lotta bits , see above . The micron can and link still available and carbs . Also got a clutch basket , no cover. Bttt for gallery pics or ask in case it was a late clear out find and Not in the pics. Still got forks and yokes, micron can and link , to system (the micron will slip on it if need both) swingarms, stock shock, generator and cover, igniter box / ecu , hi level link pipe, cheapo rear sets , 2 sets of peg lift plates , stock clip ons ,sprockets 520 , front 14t , rears 48 , 50 and rear carrier, stock clocks , front axle and spacers , sidestand. Gearbox , crank n rods , pistons. All collect near Peterborough or post (see top if thread) or poss take to next t'day . Converting into newer r6 parts l.o.l.. |
Posted By: Fandoracing
Date Posted: 22 May 2015 at 20:53
|
Does the 5eb shock fit the 5sl? Tried using that Ron site but not sure ------------- #nailit |
Posted By: 2stop
Date Posted: 23 May 2015 at 08:06
L.o.l me too , not sure on that mate but the 5sl is a different.swingarm. Out of interest (no good to u I know) the r6 06 2c0 model and r6 13s (09 to current) are the same. Try putting a post on here , tony parkitt or Colin 100% suspension would be able to tell you. |
Posted By: R6_lad
Date Posted: 23 May 2015 at 12:31
|
Do the rear set lift plates just work with the standard rear sets? Do you know how much they raise and pull back the rear sets? I'll take a set of you as mine could do with going up and back a little. Cheers, Kam |
Posted By: 2stop
Date Posted: 23 May 2015 at 18:07
| Think they would work with standard rsets but I had aftermarkets I will have a look 2moro n post back on here. |
Posted By: R6_lad
Date Posted: 23 May 2015 at 19:15
Thanks mate. |
Posted By: 2stop
Date Posted: 23 May 2015 at 19:32
|
Just had a look I got 2 sets of lift plates. If u go back to top of thread and click on the picassa gallery pics 56 and 57 are the Walter moto these look like they move back 30mm + and up about 12mm Pic 58 is the other unknown ones they move back 50mm + and up 25mm +. Remember it moves your rearsets out the width of the plates , usually not a prob - but u will probably need a longer shift rod if u not got much adjustment left. |
Posted By: Daz89
Date Posted: 24 May 2015 at 14:46
|
Hi , You still have the coil stacks if so I will have them but could you post them please. ------------- K-COLE RACING |
Posted By: 2stop
Date Posted: 24 May 2015 at 19:11
p.m me your post details daz
|
Posted By: Daz89
Date Posted: 24 May 2015 at 20:07
|
Pm sent ------------- K-COLE RACING |
Posted By: markyw4655
Date Posted: 25 June 2015 at 19:36
| alright mate by any chance do you have the generator cover left? |
Posted By: 2stop
Date Posted: 25 June 2015 at 20:08
|
Think I have the spare generator and cover still as mentioned above. (left hand side of motor) The stator pick up cover (right hand side) has gone. Will double check 1st thing in morn. |
Posted By: well slow
Date Posted: 25 June 2015 at 22:01
| Pm'd |
Posted By: 2stop
Date Posted: 26 June 2015 at 07:23
Replied |
Posted By: 2stop
Date Posted: 26 June 2015 at 07:24
Still got the genny and cover just checked this morning. |
Posted By: 2stop
Date Posted: 27 June 2015 at 08:54
|
Big scuff at the bottom of genny casing (not deep though) and doesn,t leak. paint bubbling a biot at the side too (hence price) this was bought as a track spare and unused by me . i was going to weld a protector on bottom of the casing or stick on my carbon protector that i used to run on my old one so the scratches didn't bother me . But if for a road project would need tidy / paint.   |
Posted By: motostone
Date Posted: 01 August 2015 at 17:53
|
Hi mate, do you still have the race headers and lift plates ? ------------- # Moto Stone |
Posted By: 2stop
Date Posted: 01 August 2015 at 20:02
|
Yes mate still all here , if you go to the top of the thread there's an online gallery too. Cheers markt . |
Posted By: 2stop
Date Posted: 07 August 2015 at 07:18
|
Titanium system and 1 set of lift plates sold to motostone. Micron can and link still available (also tatty stock headers if needed) |
Posted By: 2stop
Date Posted: 09 August 2015 at 17:40
| List updated at the top |
Posted By: 2stop
Date Posted: 03 October 2015 at 07:12
|
Update bump for bikerdiverdave . Have a look through fella. |
Posted By: flo400
Date Posted: 09 January 2016 at 10:40
| do you by any chance still have the r6 5eb rear shock if so im on07542227548 |
Posted By: 2stop
Date Posted: 07 February 2016 at 13:58
|
BUMP - UPDATE STILL AVAILABLE Bottom yoke and stem , unused by me track spare needs clean - £15 Swingarms (5EB) x2 unused by me spares rew marks and 1 has small dent near can -£10 Each Generator and cover complete , track spare unused by me , few marks - £35 Micron end can and link pipe fits onto stock 5eb headers , can fits with ring clamp (could do with new ring clamp at headers end) its 51.5mm - 52mm internal where it slips on the link , som think it will fit all 50mm external link pipes. marked not dor road use , no baffle can lenght 18.5" or 470mm long so not stubby so i reckon good for noise with a baffle / repack. looks like removeable cap bolts for repacking. few marks needs clean -£50 Hi level link pipe for stock headers , stainless with heatshield , never fitted by me but google MIG Hi level exhaust for R6 5eb/ Sl - £15 CDI igniter (ignition) unit (5eb) bought as track spare unused by me -£35 Carbs with velocity stacks and inlet manifold rubbers bought as spares was run on the bike once and never needed -£86 Front Sprocket , Renthal 520 lightweight + 2 lock washers (1 new) fits others see pic / spec -£12 Rear Sprockets 520 pitch and carrier (carrier for 5eb) Renthal lightweight 1 - 50 tooth , 1- 48 tooth . n.b sprox also fit - cbr600f 91-2000 and blade 92-99 . - all together - -£45 Also front fairing nose piece painted white with red stripe , tidy for track previously repaired collect / drop off only on that . all items plus post or collect / tdr courier offers , need clear out the new projects eating the pennies ! , cheers . n.b go back to the start of the thread and see pics in online gallery if required , or pm me . cheers.
|
Posted By: 2stop
Date Posted: 12 February 2016 at 13:46
Need the space could do with this lot gone. |
Posted By: 2stop
Date Posted: 24 February 2016 at 18:00
|
Micron can Sold back to the post above or btt for updated list . Need the rest gone new bikes eating money , cheers.
|
Posted By: 2stop
Date Posted: 07 March 2016 at 18:43
|
Regarding whats left just scroll up a couple of lines on this thread or alternatively right back to the top as its updated too. Pms replied , cheers. |
Posted By: motostone
Date Posted: 07 March 2016 at 19:06
|
hi, are the velocity stacks standard on the carbs? ------------- # Moto Stone |
Posted By: 2stop
Date Posted: 15 March 2016 at 19:23
only just saw this , sorry , yes they are just stock and stock carbs as far as i know
|
Posted By: 2stop
Date Posted: 15 March 2016 at 19:29
|
Nose fairing gone ; this lots now left have tried to update the pic gallery as well . Just realised i also have a set of low level ses clip ons (no tubes) i couldn't get on with em so may suit someone for a project , fitted the 5eb and 5sl .
Need the space could do with this lot gone. [/QUOTE] |
Posted By: 2stop
Date Posted: 06 April 2016 at 18:51
| bump for staffy , see the post above for whats left fella.. |
Posted By: 2stop
Date Posted: 22 May 2016 at 20:17
| Bump |
Posted By: 2stop
Date Posted: 13 July 2016 at 07:38
| Bump , go up 2 posts above for whats still left , cheers. |
Posted By: mike111
Date Posted: 13 July 2016 at 09:51
|
35 posted for the genny cover? ------------- 2012 - EMRA Roadstock 600 - 3rd 2013 - EMRA Roadstock 600 - Champion 2014 - ThundersportGB Pre national 1000 - 3rd 2015 ThundersportGB Pre national 1000 - 3rd 2016 ROAD RACING !!!! |
Posted By: 2stop
Date Posted: 13 July 2016 at 13:19
Where are u located ? If u.k mainland will do , p.m me ur dtails. |
Posted By: 2stop
Date Posted: 14 July 2016 at 20:13
|
Generator and cover sold to Mike 111. |
Posted By: 2stop
Date Posted: 02 March 2017 at 16:19
|
Bump . Genny and cover gone , go back a few lines to see what's left. Still haven't had time to eBay em g,rrr. Pm me if not sure. Cheers. |
Posted By: 2stop
Date Posted: 07 May 2017 at 15:29
|
bump sigh , still not had time to ebay . will update remaining list later , cheers. |
Posted By: 2stop
Date Posted: 07 May 2017 at 18:20
|
Updated - parts remaining swingarms x 2 - few marks and a dent on one (from end can) track spares unused by me £10 each Hi level link pipe only for stock headers (google- mig hi - level exhaust R6 5eb) £15 Stock headers ,dirty ! unused track spares £12 cdi / ignition unit ,brought as track spare, unused by me £35 carbs with velocity stacks / inlet rubbers £85 SROCKETS--- front ----520 renthal super lightweight 14t (with new lock washer if i can find it) £12 Rears bundle with carrier , 520 renthal super lightweight 1 at 50t, 1 at 48t £45 the lot (rear sprox also fits cbr600f 91-2000 and blade 92-99) standard clip ons / bars , unused by me track spares £15 front axle and spacers £8 All plus pnp or colection welcome , possibly drop at a trackday . cheers.
|
Posted By: 2stop
Date Posted: 09 May 2017 at 13:49
|
Posted By: 2stop
Date Posted: 03 December 2017 at 12:23
|
update final list , after i,ve been through some more boxes. pm me for pics via email. crankshaft with flywheel nos 22222 112 c -£40 con rods set of 4 -£40 pistons and gudgeons set of 4 -£40 ???? front sprocket 14 teeth renthal 520 lightweight + lockwasher ( 1 new ) -£12______________-SOLD (n.b fits r6 from 99-05) rear sprocket bundle - carrier and 48 tooth ,plus a 50 tooth both renthal lightweight 520 -£45_______________________-SOLD ses after market clip ons (no tubes - 22mm) will fit any 43mm forks , bit low for me but can turn upside down too. -£27_______________________-SOLD (also fits the r6 5sl rwu fork model) bottom yoke and steering stem £20 (also fits the 5sl rwu fork model) carbs with velocity stacks, been on bike once on dyno -£85 standard clip ons -£15 (also fits the 5sl rwu forks model) non stock lightweight exhaust can hanger -£8 5SL sidestand £10 front axle / spindle and spacers -£8 set of yokes and steering stem -£45 (also fits 5sl rwu up fork model) sump and level sensor, drain plu had helicoil repair - £12 CDI IGNITION UNIT -£35 swingarms x 2 - £10 stock headers , tatty -£10 clutch basket and bearing -£30 velocity stacks and intake rubbers 1 stack damaged -£15 __________________________________________-SOLD stock camshafts -£18 top engine casing , blank no no. was a spare i believe and bottom case to match - collection only on these , offers. pm for bundle enquiries / pics via email. cheers. |
Posted By: A303
Date Posted: 05 December 2017 at 18:23
|
Don't suppose you've got an R6 throttle tube there? |
Posted By: 2stop
Date Posted: 05 December 2017 at 21:17
|
Send me a pm reminder , I think I may have an old one in my boxes but not sure, will check for u at w,end though. |
Posted By: A303
Date Posted: 06 December 2017 at 10:24
|
Thanks. PM sending. |
Posted By: Fandoracing
Date Posted: 06 December 2017 at 12:59
|
Do you have a top yoke nut for a 5sl? ------------- #nailit |
Posted By: 2stop
Date Posted: 06 December 2017 at 19:14
|
Got one , check your inbox. |
Posted By: 2stop
Date Posted: 06 December 2017 at 19:15
|
[QUOTE=Fandoracing] Do you have a top yoke nut for a 5sl?[/QUOTE Sorry that last msg was for the throttle tube, sorry no top yoke nut. |
Posted By: 2stop
Date Posted: 09 December 2017 at 14:19
|
Posted By: Craig
Date Posted: 10 January 2018 at 22:33
| Will have swing arm if still available also steering stem and bottom yoke. Cheers |
Posted By: 2stop
Date Posted: 11 January 2018 at 07:31
|
O.k , prefer pick up on the swingarm (also take. Ur pick) Where r u based pm me , cheers. |
Posted By: 2stop
Date Posted: 11 January 2018 at 17:59
|
Pm sent Craig |
Posted By: 2stop
Date Posted: 13 January 2018 at 13:15
Looks like £12 p and p , Hermes, unless tdr courier ? Or u can collect . |
Posted By: Craig
Date Posted: 13 January 2018 at 16:03
| I think i have a 5sl yoke nut... if there the same as 5eb ive def got one Will have a look ... |
Posted By: 2stop
Date Posted: 05 March 2018 at 18:32
|
all parts now on the bay with new start prices ,click on "see my other items" cheers https://www.ebay.co.uk/itm/292468547826?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 - https://www.ebay.co.uk/itm/292468547826?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 |