R6 parts mainly pre injection 5eb - sl - clearout |
Post Reply | Page <123> |
Author | |
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Just had a look I got 2 sets of lift plates.
If u go back to top of thread and click on the picassa gallery pics 56 and 57 are the Walter moto these look like they move back 30mm + and up about 12mm Pic 58 is the other unknown ones they move back 50mm + and up 25mm +. Remember it moves your rearsets out the width of the plates , usually not a prob - but u will probably need a longer shift rod if u not got much adjustment left. |
|
Daz89
Racer Joined: 24 May 2014 Location: leeds Status: Offline Points: 639 |
Post Options
Thanks(0)
|
Hi ,
You still have the coil stacks if so I will have them but could you post them please. |
|
K-COLE RACING
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
p.m me your post details daz
|
|
Daz89
Racer Joined: 24 May 2014 Location: leeds Status: Offline Points: 639 |
Post Options
Thanks(0)
|
Pm sent
|
|
K-COLE RACING
|
|
markyw4655
Starter Joined: 04 March 2015 Location: hereford Status: Offline Points: 3 |
Post Options
Thanks(0)
|
alright mate by any chance do you have the generator cover left?
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Think I have the spare generator and cover still as mentioned above. (left hand side of motor)
The stator pick up cover (right hand side) has gone. Will double check 1st thing in morn. |
|
well slow
intermediates Joined: 23 January 2011 Location: Lincolnshire Status: Offline Points: 198 |
Post Options
Thanks(0)
|
Pm'd
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Replied |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Still got the genny and cover just checked this morning. |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Big scuff at the bottom of genny casing (not deep though) and doesn,t leak.
paint bubbling a biot at the side too (hence price) this was bought as a track spare and unused by me . i was going to weld a protector on bottom of the casing or stick on my carbon protector that i used to run on my old one so the scratches didn't bother me . But if for a road project would need tidy / paint. |
|
motostone
Starter Joined: 01 August 2015 Location: staffordshire Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Hi mate, do you still have the race headers and lift plates ?
|
|
# Moto Stone
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Yes mate still all here , if you go to the top of the thread there's an online gallery too.
Cheers markt . |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Titanium system and 1 set of lift plates sold to motostone.
Micron can and link still available (also tatty stock headers if needed) Edited by 2stop - 09 August 2015 at 17:38 |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
List updated at the top
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Update bump for bikerdiverdave .
Have a look through fella. |
|
flo400
Starter Joined: 22 October 2012 Location: FLINTSHIRE Status: Offline Points: 2 |
Post Options
Thanks(0)
|
do you by any chance still have the r6 5eb rear shock if so im on07542227548
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
BUMP - UPDATE
STILL AVAILABLE Bottom yoke and stem , unused by me track spare needs clean - £15 Swingarms (5EB) x2 unused by me spares rew marks and 1 has small dent near can -£10 Each Generator and cover complete , track spare unused by me , few marks - £35 Micron end can and link pipe fits onto stock 5eb headers , can fits with ring clamp (could do with new ring clamp at headers end) its 51.5mm - 52mm internal where it slips on the link , som think it will fit all 50mm external link pipes. marked not dor road use , no baffle can lenght 18.5" or 470mm long so not stubby so i reckon good for noise with a baffle / repack. looks like removeable cap bolts for repacking. few marks needs clean -£50 Hi level link pipe for stock headers , stainless with heatshield , never fitted by me but google MIG Hi level exhaust for R6 5eb/ Sl - £15 CDI igniter (ignition) unit (5eb) bought as track spare unused by me -£35 Carbs with velocity stacks and inlet manifold rubbers bought as spares was run on the bike once and never needed -£86 Front Sprocket , Renthal 520 lightweight + 2 lock washers (1 new) fits others see pic / spec -£12 Rear Sprockets 520 pitch and carrier (carrier for 5eb) Renthal lightweight 1 - 50 tooth , 1- 48 tooth . n.b sprox also fit - cbr600f 91-2000 and blade 92-99 . - all together - -£45 Also front fairing nose piece painted white with red stripe , tidy for track previously repaired collect / drop off only on that . all items plus post or collect / tdr courier offers , need clear out the new projects eating the pennies ! , cheers . n.b go back to the start of the thread and see pics in online gallery if required , or pm me . cheers.
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Need the space could do with this lot gone. Edited by 2stop - 24 February 2016 at 17:59 |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Micron can Sold
back to the post above or btt for updated list . Need the rest gone new bikes eating money , cheers.
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Regarding whats left just scroll up a couple of lines on this thread or alternatively right back to the top as its updated too.
Pms replied , cheers. |
|
motostone
Starter Joined: 01 August 2015 Location: staffordshire Status: Offline Points: 5 |
Post Options
Thanks(0)
|
hi, are the velocity stacks standard on the carbs?
|
|
# Moto Stone
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
only just saw this , sorry , yes they are just stock and stock carbs as far as i know
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Nose fairing gone ; this lots now left have tried to update the pic gallery as well . Just realised i also have a set of low level ses clip ons (no tubes) i couldn't get on with em so may suit someone for a project , fitted the 5eb and 5sl .
Need the space could do with this lot gone. [/QUOTE] Edited by 2stop - 15 March 2016 at 19:45 |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
bump for staffy , see the post above for whats left fella..
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Bump
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Bump , go up 2 posts above for whats still left , cheers.
|
|
mike111
fast Group Joined: 01 February 2013 Location: Loughborough Status: Offline Points: 438 |
Post Options
Thanks(0)
|
35 posted for the genny cover?
|
|
2012 - EMRA Roadstock 600 - 3rd
2013 - EMRA Roadstock 600 - Champion 2014 - ThundersportGB Pre national 1000 - 3rd 2015 ThundersportGB Pre national 1000 - 3rd 2016 ROAD RACING !!!! |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Where are u located ? If u.k mainland will do , p.m me ur détails. |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Generator and cover sold to Mike 111.
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Bump .
Genny and cover gone , go back a few lines to see what's left. Still haven't had time to eBay em g,rrr. Pm me if not sure. Cheers. |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
bump
sigh , still not had time to ebay . will update remaining list later , cheers. |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Updated - parts remaining
swingarms x 2 - few marks and a dent on one (from end can) track spares unused by me £10 each Hi level link pipe only for stock headers (google- mig hi - level exhaust R6 5eb) £15 Stock headers ,dirty ! unused track spares £12 cdi / ignition unit ,brought as track spare, unused by me £35 carbs with velocity stacks / inlet rubbers £85 SROCKETS--- front ----520 renthal super lightweight 14t (with new lock washer if i can find it) £12 Rears bundle with carrier , 520 renthal super lightweight 1 at 50t, 1 at 48t £45 the lot (rear sprox also fits cbr600f 91-2000 and blade 92-99) standard clip ons / bars , unused by me track spares £15 front axle and spacers £8 All plus pnp or colection welcome , possibly drop at a trackday . cheers.
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Edited by 2stop - 09 May 2017 at 13:51 |
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
update final list , after i,ve been through some more boxes.
pm me for pics via email. crankshaft with flywheel nos 22222 112 c -£40 con rods set of 4 -£40 pistons and gudgeons set of 4 -£40 ???? front sprocket 14 teeth renthal 520 lightweight + lockwasher ( 1 new ) -£12______________-SOLD (n.b fits r6 from 99-05) rear sprocket bundle - carrier and 48 tooth ,plus a 50 tooth both renthal lightweight 520 -£45_______________________-SOLD ses after market clip ons (no tubes - 22mm) will fit any 43mm forks , bit low for me but can turn upside down too. -£27_______________________-SOLD (also fits the r6 5sl rwu fork model) bottom yoke and steering stem £20 (also fits the 5sl rwu fork model) carbs with velocity stacks, been on bike once on dyno -£85 standard clip ons -£15 (also fits the 5sl rwu forks model) non stock lightweight exhaust can hanger -£8 5SL sidestand £10 front axle / spindle and spacers -£8 set of yokes and steering stem -£45 (also fits 5sl rwu up fork model) sump and level sensor, drain plu had helicoil repair - £12 CDI IGNITION UNIT -£35 swingarms x 2 - £10 stock headers , tatty -£10 clutch basket and bearing -£30 velocity stacks and intake rubbers 1 stack damaged -£15 __________________________________________-SOLD stock camshafts -£18 top engine casing , blank no no. was a spare i believe and bottom case to match - collection only on these , offers. pm for bundle enquiries / pics via email. cheers. Edited by 2stop - 09 December 2017 at 14:19 |
|
A303
Racer Joined: 15 April 2010 Location: Wiltshire Status: Offline Points: 973 |
Post Options
Thanks(0)
|
Don't suppose you've got an R6 throttle tube there?
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Send me a pm reminder , I think I may have an old one in my boxes but not sure, will check for u at w,end though.
Edited by 2stop - 05 December 2017 at 21:18 |
|
A303
Racer Joined: 15 April 2010 Location: Wiltshire Status: Offline Points: 973 |
Post Options
Thanks(0)
|
Thanks. PM sending.
|
|
Fandoracing
Racer Joined: 16 May 2015 Location: Scotland Status: Offline Points: 918 |
Post Options
Thanks(0)
|
Do you have a top yoke nut for a 5sl?
|
|
#nailit
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
Got one , check your inbox.
|
|
2stop
Instructor Joined: 31 July 2011 Location: cambridgeshire Status: Offline Points: 5846 |
Post Options
Thanks(0)
|
[QUOTE=Fandoracing] Do you have a top yoke nut for a 5sl?[/QUOTE
Sorry that last msg was for the throttle tube, sorry no top yoke nut. |
|
Post Reply | Page <123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |