Knee sliders, Honda gearing, Gixxer 6 K8 bits.

Can't bring myself to sell used knee sliders but got all these lying around that need to be smeared on the asphalt. £10 a pair and £10 for the big Astars wet one. Or £55 the lot including postage. 

Load of gearing, some of it un-used. Was for an old (1971) CB500/4 but may fit others. Some of the front sprockets are labelled JTF1265 which is listed as fitting other models. Only you will know if it will fit your bike but £60 takes the lot. Front sprocket in the middle not included, that's a Ducati one that was in the box. 

Gixxer 6 K8/9, 

Screen                                   £35 (new)

Discs                                     £60 (used)

Rear Discs x2                         £60 (used)

K&N Air Filter                         £30 (used but good)

Bendix Pads                           £20

Tank infils                              £20 Can't tell if there are supposed to be little tabs on them or not but will                                             take more photos if anyone interested. 

Sidestand                             £30 No spring or plug on the switch

Rad Guards                          £20 Not sure if these are for the K8 but they were in my box of bits. 

Rear Caliper/Goodridge hoses front and rear, pads and master cylinder £40. Will need an overhaul as been sat for a long time. Recall an issue with fitment K8/K9 too so make sure this is the one that fits your swinging arm. Some spotter will know I'm sure but I no longer have the bike to check. 

I've just listed some Ducati bits on the Ducati forum too, perhaps some of that may be of interest to trackdayers. 899/959/1199 stuff. Belly pan, clock bracket and a sprocket. Will list here if anyone pipes up. 

Pics of course: