Translogic Micro Dash

Chap on RSVR.net wants one, I've PM'd him for you

interested..how easy is this to fit.? and does it fit anybike..

cheers

Phil

very interested in taking that off ya mate! does it store your laptimes so you can check them when you come in? also if your on a quick lap does it indicate this with a light, like the starlane laptimer does?

use the button? by that do you mean pushing a button as you cross the finish line? surely thats not very accurate!

I've been getting a few messages with people making offers on this. The dash sold on ebay shortly after this post went up in July 2014!! 

Hi Guys, I'm new 2 the forum so go easy!!! I'm currently in the same situation as the above thread as I have purchased a translogic md 1-2 and have no wiring diagram or instructions and I'm struggling to wire it up.
I don't suppose anyone has the wiring diagram/ instructions that they could send me?
I'd really appreciate it if anyone can help!
Many thanks Tim.

Hi nozdog, thanks for the post. My dash didn't come with a wiring harness which is where my problem lies really, It does have 2 small oem looms that come out of the back of the dash where the harness would connect to. So it's the dash wiring diagram that I need. I hope this makes sense, I'm also going on what the/my garage are saying, He a ex racer and tt rider and knows his way round a bike but he's abit stumped with the wiring. He's spoke to translogic but they have lost the wiring codes for the early dashes!! Very helpful. Lol.
Ur input appreciated.
Tim.

Hi John, thanks very much for the response, the pin out for the dash is exactly what I'm after! Ull have to excuse me because electrics aren't my bag... Lol. I've had a good search around on google but cant seem to find the pin out for the micro dash 1-2. Ive pm'd snap of here who I think has the wiring diagram for the dash but as yet I've had no response..... But fingers crossed he may get in touch. I don't suppose anyone knows him personally that could perhaps give him a nudge for me? Many thanks Tim.

Hi trackdaybob, yes we've been in contact with translogic who have apparently lost all wiring diagrams for the early micro dash's!!!! Not what u expect to hear when u ring up, so we're snookered on that front, I'm just hoping that someone has the pin out for the dash saved somewhere.
Thanks for the input
Tim,

Just replied to your pm.

gazzasp1 wrote: use the button? by that do you mean pushing a button as you cross the finish line? surely thats not very accurate!

About as accurate as pushing the button on a stopwatch. Still one of the preferred methods by many at trackside. Being a tenth or so out isn't really that important in certain scenarios and when it becomes an issue you upgrade. Simples.

hello
PLEASE SEND ME
the PDF booklet in order to be able to set up the:
translogic micro dash 1-2
my email address is:   soudeur69@yahoo.fr
THANK YOU

I guess its long gone, the dash huff

Greets randy

Snap wrote: <p ="msonormal"=""><a name="_MailAutoSig">Translogic Microdash MD1-2 for sale. Came off my ZX6RR trackbike when I put the original clocks back on it to sell. The dash is in very good condition and works perfectly, the bike it was fitted to didn’t get used much and was always stored in a garage.<o:p></o:p></a> <p ="msonormal"="">Dash has rev counter, gear indicator, lap timer, shift lights, etc. This is easy to fit and looks great!<o:p></o:p> <p ="msonormal"="">Still have original box and will come with manual, all wiring, lap timer button and speed sensor. I can also include the bracket I used to fit it to my Kawasaki, in case it is any use. The excess/unused wires were cable tied out the way when I fitted it, rather than chopped. <o:p></o:p> <p ="msonormal"="">More pictures available to email if required.<o:p></o:p> <p ="msonormal"="">Looking for £255, if no interest on here it will go on ebay in a couple of days.<o:p></o:p> <p ="msonormal"=""> <p ="msonormal"=""> <p ="msonormal"=""> <p ="msonormal"=""> <p ="msonormal"=""><span style="line-height: 1.4;"></span>